How often have you or someone you know bought a lounge chair only to see how uncomfortable it is? The possibility of buying one that meets your needs and expectations is next to nil, considering the wide array of products on the market. On the other hand, building a DIY lounge chair that suits your needs is highly likely. Making a DIY lounge chair may seem complicated and time-consuming. However, it's much easier than you think. This post contains some of the best DIY Lounge Chair Ideas you can make from home. When you build your own outdoor furniture, not only will it save money, but it will also become a family project.
These 25 DIY Lounge Chair Ideas are perfect if you are looking for a unique way to spend your weekend and make something useful with your hands. Some are simple, and some are complex, but there's nothing you can't build by yourself with patience and effort. As you are done reading this article, there will be no more excuses for not building your own DIY lounge chair. We have made sure that our projects are simple and easy to follow, even for those of you who have no previous experience in DIY or the construction field. So without further ado, let's begin with our collection!
You Can see: 24 DIY Recliner Plans You Can Make For Comfort
DIY Modern Outdoor Lounge Chair
The DIY modern outdoor lounge chair is not for the faint of heart, but if you are up for the challenge, then its construction will be a rewarding experience. This DIY lounge chair is perfect to place near the pool or next to your favorite reading corner. The design is more complicated than most furniture projects and has many parts to cut out and glue together. Make sure you have a lot of wood clamps available!
How To Turn TV Boxes Into Lounge Chair
Turn your TV boxes into a lounge chair. Here's how: Take some pieces of cardboard and cut them into the shapes shown in the video above. Now glue the shapes together to make one long block. Make another block just like the first, only with one less piece on each side. Put glue on the inside edges of both blocks and stick them together. To make it comfortable for sitting, make two small triangles for armrests and stick them on top of each end.
Materials:
- Large Cardboard Boxes
- Tv Boxes For Packaging Tv
- School Glue And Brush
- Foam
- 2 Large Rolls Of Heavy Duty Duck Tape
- Plastic Sheet From Home Depot
- Foam
- Velvet Fabric (Velvet)
- Staple Gun
- Foam Board
DIY Outdoor Lounge Chair
The DIY outdoor lounge chair is an easy project that you can build out of scraps. Sandwich four pieces of heavy wood together so it’s almost like one long piece, and then you’re going to cut the angles in on the sides to make it look more like a chair. Attach cleats to this entire piece and place them at intervals. Then attach support for the backrest as well as the seat slats. Using a few woodworking skills and good tools, you can easily make an outdoor lounge chair within several hours.
How To Build An Outdoor Lounge Chair
If you want to build the best outdoor lounge chair, then you'll want to know how to make it. The design of this chair is very flexible and can be modified in many ways to suit your needs. Choose your preferred wood, then prepare your wood pieces using an angle gauge to ensure accuracy. Join your pieces together with a jigsaw, and then cut out the seat shape with a saber saw or table saw. Sand the edges smooth and apply linseed oil before adding some cushions.
Materials:
- Circular saw
- Track Saw
- Miter Saw
- Table Saw
- Angle Gauge
- Clamps
- Pocket Hole Jig
- Forstner Bits
- Plug Cutter
- Glue
- Furniture Feet
DIY Outdoor Chaise Lounge Chair
If you want to provide a more attractive place for your backyard and make it more comfortable, this pocket hole jig DIY Outdoor Chaise Lounge Chair will be super helpful. This chair is made of high-quality materials: wooden frames and cushions. After that, you only need to use a pocket hole jig and screw it together to complete this project successfully. It is a unique piece of furniture for you to spend a relaxing time after a long day at work. This simple project will definitely give your patio or deck an instant upgrade.
Materials:
- DAP Tank Bond Thread Stopper
- DAP Platinum Patch (if painting)
- DAP Premium Wood Filler (if staining)
- DAP Spray Adhesive
- 4 x 4 x 8’ Douglas Fir or Cedar
- (9) 2 x 4 x 8’ Douglas Fir or Cedar
- 2-½” Exterior Pocket Screws
- 1-¼” Exterior Wood Screws
- Exterior Wood Glue
- (2) ¼” x 5” Galvanized Carriage Bolts, Washers and Nuts
- (2) 2-½” Exterior Hinges
- Plastic Furniture Feet Pads
- Primer
- Paint
- Cushion
You Can See: 30 DIY Outdoor Sofa Plans
DIY Modern Single Outdoor Chaise Lounge
Create your own modern outdoor furniture with our boxed-set DIY Modern Single Chaise Lounge. This set is a perfect solution if you have the space and like to do things yourself. There are no screws or bolts to put together, and everything comes ready to assemble. You will just need a screwdriver and an extra pair of hands so that you can make this set in no time at all. This project is relatively easy to build so that you can have your very own DIY outdoor lounge in no time!
Materials:
- 3 - 2x4 @ 10 feet long
- 2 - 2x2 @ 8 feet long
- 7 - 1x4 @ 8 feet long
- 2 sets of 3" hinges suitable for exterior use
- 2-½" exterior self tapping wood screws
- 2" exterior self tapping wood screws
- Exterior wood glue
How To Make A Lounge Chair
You can make a lounge chair using cedar, screws, and glue. Before starting, you should have the tools mentioned above ready. You can buy the cedar lumber from any home furnishing store or build it yourself. Cut the wood pieces using a jigsaw, straight edge, and sander. Use clamps to hold them together tightly for gluing process. Then screw them securely to make your lounge chair sturdy. Be careful working with the wood to give a fine finishing to it.
Materials:
- 1 x 10 - 8’ Cedar (3)
- 2 x 4 - 8’ Cedar (3)
- 1 x 4 - 8’ Cedar (3)
- 1 x 3 - 8’ Cedar (3)
- 2 x 2 - 8’ Cedar
- 1 ½” Screws
- 2” Screws
- 4” Screws
- 3 ½” Screws
- Hinges (4)
- Wood Stain
- Wood Glue
DIY Mid-Century Lounge Chair
Turn classic mid-century design into a comfortable lounging experience with this easy-to-follow plan. Just gather the materials, draw and cut out the template of each piece from cardboard, then cut the wood. Use that template to make all four pieces, then assemble them into one awesome chair. You will need some basic woodworking skills, but there's lots of help in this guide if you get stuck.
Supplies:
- DW745 10-Inch Compact Job-Site Table Saw
- Bosch MRC23EVSK Router
- Makita RT0701CX7 Router
- WEN 3939T 2.8-Amp 9-Inch Benchtop Band Saw
- WEN 4208 8 in. 5-Speed Drill Press
- INCRA Precision T-Rules
- LENOX Band Saw Blade Diemaster 62 14/18tpi
- Watco Natural & Medium Walnut Danish Oil
DIY Lounge Chair
This lounge chair is not the easiest thing to build. It requires some knowledge of woodworking and the availability of tools like a jigsaw, drill, and clamping table. However, if you follow instructions carefully and are patient enough, it can be enjoyed by you and your guests every day. It is easy to make, but the structure of this lounge chair is unique and somewhat complicated. It will go together easily and quickly once you have a template ready.
DIY Chaise Storage Lounge
You can create your own chaise lounge with the proper supplies and tools. Simply cut the pieces and assemble them to make an attractive resting spot. Cover each piece with foam and fabric for comfort, then finish by attaching a back and armrests for added support. This chaise lounge is perfect for both indoor and outdoor use. It has an extra-long backrest, making it a comfortable place to read or sleep.
DIY Lounge Chair
Are you looking for a comfortable chair that can be used along with your balcony? Well, here's one that we have prepared especially for you. The DIY Lounge Chair is a cheap way of designing a colorful and comfy lounge. This lounge chair is a project that you can do yourself on the weekend. It offers a relaxed and contemporary style to your room and adds a new perspective to the familiar armchair.
DIY Outdoor Lounge Chair
We will show you how to build the outdoor lounge chair, which is an excellent project for anyone and would add to your patio or deck. This lounge chair can also be modified to suit your needs. With an easy-to-build plan, you can create a new and modern lounge chair for the outdoors that will make a statement. An ordinary bench loses its appeal quickly, but our design gives you a high, deep seating area that's comfortable and stable.
DIY Plywood Lounge Chair
The DIY plywood lounge chair is just the piece of furniture you need by your side when you need to relax. Making it is another story, but it's not complicated: first, sketch the design on a sheet of paper, then start cutting the pieces one after another. Take out the bottom side pieces and structure its curves with a scroll saw. After that, make grooves on each side of the pieces for the backrest and seat, then fit them snugly to the frame with glue while gluing dowels in place – as pins – to secure them safely.
Materials:
- 22mm birch plywood 40x120cm
- 2x 18mm birch plywood 20x120cm
- Wood screws
- Dowels
- Wood glue
- Danish oil
DIY Cardboard Lounge Chair
This DIY cardboard lounge chair is your next home furnishing if you have a limited budget but want to make your home more beautiful and cozy. Anyone could construct this chair because it is straightforward to build. You need cardboard, scissors, duct tape, a meter stick, vinyl, and a vinyl cutter. Click on the link below to make this cardboard lounge chair accordingly.
Materials:
- Cardboard
- Duck Tape
- Scissors/knife
- Meter Stick
- Vinyl & Vinyl Cutter
Bamboo Chaise Lounge Chair DIY
This one-piece chaise lounge is a quick project. Bamboo plywood has excellent stability, making it easy to work with. The curves are very forgiving and allow you to build this chair without a lot of clamping or a particular setup in advance. The shape of this lounge chair is similar to that of a human being to bring maximum comfort to the person sitting down on it. This DIY project doesn't need many tools or much time to make it, so you can do it even if you have limited woodworking experience.
Materials:
- 1 sheet of ¼" bamboo plywood 4'x8'
- 2 sheets of ¾ particle Board 4'x8'
- 1 sheet of semi-rigid material to skin the top of the form
- 600 wine corks
- 5- Crown Bolt ¼-20 x 13mm Zinc-Plated Steel Type-A Insert Nuts
- 5- Crown Bolt ¼-20 x 70mm Coarse Steel Hex Drive Connecting Bolt
- 7- 8 x 1-¼ HighPoint Round Washer Head Screws
- Wood glue
- AMF Safecoat Safe Seal or other eco-friendly clear sealer
DIY Zip Tie Lounge Chair
This lounger is a simple and inexpensive way to add extra seating when you have company. It's a comfortable, modern chair that can be customized however you'd like. It uses zip ties and wood to create the frame, so it's simple to build. Before cutting the wood into pieces, use a computer system to design the prototype and make sure all of your measurements are correct. Once you're happy with the plan, you can move on to building it!
Materials:
- One 4'x4' piece of ¾" plywood
- One 50-ct. package zip ties, rated to at least 50 lbs. breaking strength
- Finish of your choice
- You will need these tools:
- CNC router, minimum 4'x4' bed size
- Thumb drive
- Orbital sander
- Rags
How To Build An Outdoor Lounge Chair
Cut the plywood into rectangular pieces. Make sure to cut one long piece and one short piece, then glue them together. You will have to cut the arms separately with a compound miter saw. Use the extra piece of plywood for something else, or throw it away if you do not need it. After creating a backrest and seat, glue them onto the legs using exterior glue. When every piece fits together perfectly, then your chair will remain strong and stable.
DIY Lounge Chair With Storage
Build a comfy and stylish lounge chair with storage in it. You will need plywood, boards, heavy strap hinges, screws, sandpaper, and a miter saw. First, determine the lounge length and use this measurement to cut the pieces of wood. After you have the frame ready, attach a support to the back of the chair that will raise its backrest. Now comes the time to create a seat by adding braces to it. Finally, cover it with a sanded sealer or paint if you like your DIY lounge chair to be colorful.
Materials:
- 2″ x 6″ x 8′ boards (actual 1 ½” x 5 ½”)
- 2″ x 2″ x 8′ boards (actual 1 ½” x 1 ½”)
- 1″ x 6″ x 8′ boards (actual ¾” x 5 ½”)
- 4″ heavy strap hinges
- 2 ½″ screws – self tapping preferred
- 2″ screws – self tapping preferred
- sandpaper
- sealer
- miter saw
- drill/driver
DIY Outdoor Chaise Lounge
In this post, we will share with you how to build a DIY outdoor chaise lounge. During summer days, you can stay in the backyard enjoying your time with family or friends and reading a book. But there are also other choices of activities which are more active and fun as playing outdoor games. In this case, you need a comfortable seat to relax after playing challenging games! This project is straightforward to follow if you take all the measurements carefully to make one for yourself!
See More: 29 Free DIY Adirondack Chair Plans
DIY Cardboard Lounge Chair
This DIY Cardboard lounge chair is just what you need to relax. It's made of five pieces and will become a present for yourself or a friend who needs a comfortable spot to rest. The design and plan are simple to follow, and the chair can be assembled with minimal supplies. Make it all in one day, then enjoy a comfortable seat while you enjoy reading or watching TV. This project won't take much time, either - you can complete it in a weekend. Give it a try!
How To Build A Lounge Chair
A lounge chair is an excellent piece of furniture if you love to sit back with friends, read a book or enjoy a good movie. The How To Build A Lounge Chair will teach you how to build this comfortable piece of furniture in your home workshop. The materials needed include wood, miter saw, table saw, screws, foam, fabric, and glue. Once you have assembled the pieces for the legs and armrests, things get easier as you prepare the frame for the backrest and seat and cut out the foam and fabrics to cover its seats and backrests.
DIY Lounge Chair For $5
Here is a great DIY project that you can do in just 24hours with just $5. No professional help is required for this project; it's effortless to set up. You will need wood glue, plywood, tape measure, and wood screws to build this lounge chair. Then you can stain the whole thing or paint it any color you want. This easy-to-follow guide will ensure that you have the perfect relaxing spot in your backyard or even indoors.
Chaise Lounge DIY
You will need a plan, materials, and tools included with the project. It's very easy to follow, and you can do it in your own garage or workshop at home. All you have to do is gather all the materials needed according to the plan. Cut them out with a miter saw, glue them together and screw them up with wood screws according to the instructions given. After this, you can upholster your chair with fabric and make cushions for it.
DIY Outdoor Lounge
This video will show you how to build a DIY outdoor lounge that works as a bed and a bench seat. There are no complex tools or materials needed, and it can be customized any way you like. Sit on the comfortable foam while enjoying an outdoor meal or stretching out after reading a good book while lounging back. This versatile piece can be arranged in various different ways to provide many relaxing options.
25. DIY Lounge Chairs
We offer you an excellent idea for a DIY project – the lounge chair. You'll need some tools such as a jigsaw and drill, a sheet of plywood, and some screws. Cut the plywood into two pieces and drill holes in one of them. Join the parts together with piano hinges, and you can keep sitting on it in your free time. Follow the instructions above, and you'll be sitting back in your new DIY lounge chair in no time. This way, you will have an instant lounge chair where you can relax after a long day.
Materials:
- 24” x 32” Sheets of plywood
- 12” Piano hinge
Conclusion:
Making a lounge chair can be a challenge, but it is worth it in the end. Buying a lounge chair is expensive, especially if you have a bigger budget and want to buy from the furniture stores. We have included 25 DIY Lounge Chair Ideas to choose from in this article. Before anything else, we would like to thank you for taking the time and reading our article today.