Are you into recording and producing your own music? A pop filter is a must-have to "clean" up your sound so that you don't record those annoying popping sounds. In this article, learn about how to build a DIY pop filter for your home recording studio so you can start recording at home! Pop filters are typically a mesh placed over the microphone to remove or reduce plosives, sounds like "popping" that ruin recording. You’re excited to start recording your podcast—until you realize that you need something to keep your plosives under control. Here are 20 DIY pop filter projects to show you how to make a DIY pop filter that is super simple, cheap, and works great.
First of all, the current and best way for you to make your own pop filter is with items that you have at home and others that can be found in stores. Pop filters are inexpensive and super important to maintain high-quality audio. A pop filter helps cut down on pops, hissing sounds, and fricatives. If you don’t have one for your microphone, you might be losing out on a lot of clarity and quality levels. These DIY pop filter projects are fun, easy to make, and will help you save some money! Enjoy these 20 DIY pop filter projects.
DIY Microphone Pop Filter
This DIY Microphone Pop Filter is a cheap and easy way to solve the all too common problem of unwanted popping noises in your vocal recordings. It's made with pantyhose stretched over a 6 inches embroidery hoop and held by using black tape to seal their edges together. You'll use pliers and scissors for this build, which should take about 10 minutes.
2. Cardboard Microphone Pop Filter DIY
You could go out and buy a microphone pop filter, but where's the fun in that? Now you can make one of your own. The best thing is, it only takes a few hours. Those pop filters that come with your mic are fine, but what if you have more than one mic? Or your filter breaks and you need a replacement in a hurry? This is one of the easiest methods to make a homemade pop filter, and it only takes around 30 minutes. If you're looking for a very inexpensive way to deal with plosive sounds coming through your microphone, check out this DIY pop filter that you can make right at home. The list of tools is simple, and the entire process takes mere minutes.
3. DIY Cheap Pop Filter For Snowball
This cheap pop filter is easy to make and perfect for the Blue Snowball microphone. You will need a wire coat hanger, super glue, a large zip-tie, electrical tape, and pliers. The first step is to cut the hooks off of the wire hanger. Use pliers to make a loop for the filter, and wrap it with electrical tape. Cut two circular pieces of fabric, and glue them both together around the loop. After gluing the fabrics onto the loop, snap in a large zip-tie. Cut out a small hole in the zip-tie using your scissors. Then, pop the filter onto your microphone!
4. DIY Cheap Microphone Pop Filter
Microphone pop filters are not cheap, but if you know how to make one from scratch and cheaper, why spend the extra money buying a new one. In this tutorial, learn how to set up a microphone pop filter (sm58) for your video project. This is a useful tool for recording voice-overs for video and also for podcasting. All that you need to make a pop filter on your own is a piece of plywood, some nuts and bolts, and a wire clothes hanger! In this guide, the materials may cost you nothing if you already have them in your home and the tutorial teaches you how to build them in less than an hour. Usually, it takes less time than that, depending on your speed of work and other factors.
5. DIY Mic Pop Filter Using Home Supplies
6. How To Make A Pop Filter In 2 Minutes
This video is so easy to follow, the maker used his own voice to talk about the project because the process is simple and quick. By using these materials you will make a pop filter in 2 minutes and you can use it over and over again. The material is durable so you do not need to buy another one every time you want to record something. You’ll need an embroidery hoop, a flexible wire, some zip-ties, electrical tape, cutter, hose clamps, and an old pantyhose or any spandex that you think will do better. I do encourage people to think of their pop filter as a blank canvas and get creative with it. There is no right or wrong way to make one.
7. How To Make A Microphone Pop Filter
Make a professional-looking pop filter using an embroidery hoop, pantyhose, and some scrap materials. Learn how to make your very own pop filter. Just grab an embroidery hoop, pantyhose, and a few other supplies to create a pop filter that will look great in any studio. This design is inspired by classic pro studio pop filters. They may look beautifully made but they are actually very easy to make. The materials I used did not cost more than $15.
8. DIY Pop Filter
Do you want to save a few dollars and make your own microphone pop filer? Learn how to make a pop filter with two simple materials. It’s easy and will clear up any popping sound on your audio only in a few minutes. With all the steps necessary to make a pop filter with two simple materials (a wire hanger and a peanut butter jar) This quick, easy tutorial will have you capturing more at-home voiceovers with pro sound in no time.
9. 3 Ways To Make A Pop Filter
There are three main ways you can create your own pop filter for your microphone. This guide shows you the easiest methods to do so. For the first method, you won't need anything but a wire and pantyhose, since you will be sewing the filter. The second method involves using an embroidery hoop filter, so it's easier and you don't have to cut anything up. The final method involves using a coffee can lid and some pantyhose as well.
10. DIY Pop Filter
If you're looking for a cheap and effective alternative to commercial pop filters, this is the DIY project for you. This homemade studio tool is perfect for podcasting, recording vocals, streaming, or any other situation in which you want to eliminate popping plosives. Skip the wire hanger and follow our pattern of pantyhose that will suit your needs. It's not as big as some other filters so it can be easily packed in your suitcase in case you need it on the road.
11. How To Make DIY Pop Filter
A pop filter is essential for recording voiceovers and vocals because it improves the sound quality of your recordings by clearing the air around the microphone. This guide will help you make a simple and advanced-looking pop filter in just a few minutes. It doesn't require much effort or expensive materials to do so. You'll need a wire hanger, tape, stockings or pantyhose (whichever is available), and scissors to do this easy DIY project. You'll need a wire hanger, rubber band, tape, stockings or pantyhose (whichever is available), and pliers or scissors.
12. DIY Cheap And Repairable Pop Filter
This tutorial is provided to introduce you to a DIY cheap and repairable pop filter that is removable, durable, and relatively cheap. Some of the requirements are a 5-inch embroidery hoop, 6 inches solid copper wire, 1-inch husky c clamp, scissors, super glue, a 3D printer, and sufficient filament for 3D printing. You can produce about 10 filters for $20 or less. You will be introduced to this filter as well as be given step-by-step instructions on how you can create one yourself.
13. Free DIY Microphone Pop Filter
Need a pop filter that would give excellent and durable results? You can use this method in this video tutorial guide. Use the things around you to create your own pop filter. This DIY version includes a set of paper and tissue that you could use. This DIY pop filter is as simple and elegant as it gets, but it doesn't really do much other than protect the diaphragm of your microphone. If you know anything about microphone technology, you'll know that preventing moisture from getting in contact with the diaphragm is crucial to prolonging its life. So, if you're looking for a no-frills solution without the extra flare (and budget) this is perfect. It’s easy to assemble and use, although it doesn't have a professional look.
14. How To Make Your Own Pop Filter
From this video, you can make your own pop filter and save money some money. The video explains how, with the items that you need such as a wire hanger, chicken wire, pantyhose, or any other materials of your choice. You will need pantyhose or any smooth spandex, a wire hanger, and scissors. Follow these simple steps to make your own pop filter. This tutorial demonstrates a no-cost method for making your own pop filter.
15. Homemade Pop Filter DIY
https://youtu.be/KbJT6if-YEQ
Building your own home recording studio can save you hundreds or even thousands of dollars in the long run. Learn how to make your own DIY pop filter. You will need some embroidery hoops, pantyhose, and a hot glue gun. Get ready for the setup - it's quick and easy. You can choose to spray the hoop with any color you wish. The setup is quick and easy so give it a go, grab the materials and follow along! Once you've got the hoops fastened together with the pantyhose over them, choose any color of spray paint!
16. DIY Pop Filter For Mic
Here’s a super affordable and easy pop filter for a mic that you can make on your own. It doesn’t take too much time and effort to make it, nor does it cost a lot. You can achieve a cooler-looking pop filter with a few materials you have at home. The making process is a bit more complicated compared to the one above and if you don’t have a glue gun, it becomes even harder. The tutorial on how to create this DIY pop filter for the mic stand is detailed enough but I think that the foam sock would be more effective (and more affordable).
17. DIY Pop Filter
There are plenty of DIY pop filters out there, but this is one of the easiest and quickest ways to make one. Making your own pop filter is super easy, and a good way to start experimenting with sound engineering. Create professional-quality recordings at home with this clever DIY pop filter. You'll need a wire hanger, a pair of old tights, cable wire, and some clips to make it. Once you've mastered the simple making process, you can make as many as you want. Even the most time-strapped person can follow this simple tutorial.
18. How To Make A Cheap Pop Filter
How would you like to make your own pop filter at home without having to spend tons of money? Or do you think a pop filter is really not necessary in the first place? Some people do think that it's unnecessary, but for those who are seeking perfect studio sound quality, it's a must. And you can easily make one from scratch with just a few things from the dollar store, with the exception of the dowel. Pantyhose and cardboard? Yep, you can use those to make a pop filter for your home studio. The pantyhose will suck up any moisture when recording vocals for your podcast, youtube videos, or even music! Using this method instead of buying a filter will save you a lot of money.