Surfing is not just a sport but can be a way of life too. If you are a surfer, it is probably because you want to spend your life on the beach and in the water riding those waves. As a surfer, the best part about the sport is that it does not cost much money to get started. You will not have to buy any expensive equipment such as bats and balls. Other than being cheap, surfing also requires little maintenance. All you have to do is clean your surfboard after every use and store it properly when you are done with your surfing session. If you are new to surfing, you must know that the scratches on your surfboard are probably due to poor storage. One of the best ways to store your surfboard is by using DIY Surfboard Racks.
In this article, we have listed 19 DIY Surfboard Racks that you make for your surfboards. Some of the projects are woodworking projects, some are PVC projects while others require the use of simple materials that can be gotten easily. One of these DIY projects might be just what you need to get your surfboards off the floor and into a dedicated storage space where they won't get scratched up as easily. Scroll down, choose a project that suits your needs and start building today!
How To Make A Surfboard Rack
A surfboard rack is a necessity if you have more than one board. This is particularly true if you have a lot of boards or your boards are long. If you don’t have enough space to store them in your house, consider adding a surfboard rack to the garage. For the making of this surfboard rack, you will need a couple of woodworking tools. It’s best to have some experience in woodworking before trying this out. You can build yours to fit in as many surfboards as possible, depending on the available space.
Materials:
- 2400 x 1200 x 18mm marine plywood
- Exterior PVA
- 25mm Nails
- 50mm Stainless-steel Screws
- 12g X 32mm Galvanised Screws
- Power Saw
- Jigsaw
- Handsaw
- Router And 6mm Rounding Bit
- Electric Sander
- Clamps
- Drill And Bits
DIY Surfboard Wall Mount
The best thing about this surfboard mount is that you can easily detach it from the wall and carry it anywhere. This mount isn’t just for surfboards but also works perfectly with wakeboards and snowboards. The Surfboard Wall Mount is made up of high-quality aluminium, which gives it a steel-like strength. It is durable, strong, and sturdy. It is designed in such a way that it can be mounted anywhere – garage, room, or lounge.
Bicycle Surfboard Rack
When it comes to surfing, you want to ensure that your board can be easily carried around. But with a bicycle, this might be a bit of a challenge. Fortunately, there are ways in which you can make a surfboard rack for your bicycle to help you transport the board easily. This tutorial is going to show you how you can make your own bicycle rack for the surfboard. The creator used PVC pipes and connectors to allow him to attach the rack to the bicycle. This is a very simple bicycle rack that you can make on your own.
DIY Surfboard Rack
You can easily make DIY surfboard racks to store your surfboards, especially when you have a big family. A simple surfboard rack should be able to hold up to five surfboards, but you can also make an advanced rack for more boards. If you have a large family and your kids are into surfing, then you’ll need a rack that can store at least five or six boards. If you only have one or two boards and they’re not tall, then a single-board wall mount rack would suffice.
Materials:
- Angle shelf brackets
- Some wood strips
- Piece of plywood
- Rubber or foam mat
- Screws
- Round Foam Pipe Insulation
- Eye hooks
- Long Bungee Cord
How To Build A Surfboard Rack
If you’ve got a couple of boards, but not enough space to store them, then you’ll find our surfboard rack plans will help. Whilst you can easily buy surf racks to store your boards, if you’re the DIY type and want to save some money, then you can build your own. This surfboard rack is easy to build and will hold up to 6 boards. It just uses a couple of pine boards and some screws and glue (and paint if you're into that). You can follow these plans exactly as they are or modify them to suit your own needs. Just remember: the more surfboards you plan on storing, the longer the rack will need to be and the more weight it will need to be able to support.
DIY Surfboard Rack
This DIY surfboard rack is the perfect gadget for anyone who loves surfing a lot. This will allow you to store and display your boards neatly in any room of your house, garage, or even by your front door. You can easily hang it up on the wall and have easy access to your surfboard whenever you need one. The best part about this is that it’s actually pretty easy to make and you don’t need to purchase anything else besides the wood you want to use.
Materials:
- 1 length of timber
- Drill with a drill
- 1 packet mushroom head nuts and bolts
- 2 lengths of PVC plumbing pipe 3m
- 3 lengths of 1m plumbing insulation tube
- 12 Caps
How To Make A Wall Mounted Surfboard Rack
This DIY guide is about how to make a wall-mounted surfboard rack. First, you need to buy the materials for this project, such as two rack sides and six rack arms. You can order them from Amazon or a local hardware store. Make sure that you have extra wood screws on hand as you may need them later. In addition to these items, you will also need a power drill, an electric screwdriver, sandpaper, and some paint or varnish if desired. Once all the materials are ready, you can start building your very own wall-mounted surfboard rack!
DIY Huge Surfboard Rack
For those who have a lot of surfboards, this DIY huge surfboard rack is going to be the perfect solution. The good thing about this thing is that it will help you save space and make your garage look nicer. The best part? It actually looks like a piece of furniture! The thing is if your garage does not have enough space to contain this, don’t even think of making one unless you want the rack to be outside. Also, this rack can contain a lot of surfboards.
How To Strap A Surfboard To A Car Without Rack
Surfboards are hard to transport. They tend to belong and are heavy and don’t fit well inside of a car. The solution is to put them on top of your vehicle with a roof rack. But what do you do if you don’t want to install a roof rack? The method we’ll be sharing today involves using two straps to secure the surfboard(s) to the car. If you’re not familiar with ratchet straps, they are nylon or polyester webbing straps fitted with hooks at one end and with a ratcheting mechanism at the other end.
5$ Outdoor Surfboard Rack
We know how much you love surfing and we also know that your surfboard may be the most important object in your life. So if you want to keep it safe from thieves and damage, you should probably consider building an outdoor surfboard rack. The best part about this surf rack is that it only costs $5. Yes, $5! How awesome is that? In this tutorial, you will learn how to create a really cheap, but effective surfboard rack for just $5. Let’s get started!
Materials:
- T Junction
- 90 Degree Elbow Bend
- 45 Degree Elbow Bend
- End Caps
- Pvc Pipe
- Pvc Solvent Cement
How To Build A Car Roof Rack For Your Surfboard
So you've finally got your surfboard and you're ready to hit the beach. But how are you going to get your surfboard to the beach? You could put your surfboard in the backseat of your car, but that's not safe in transit. This guide will show you how to build a car roof rack for your surfboard. The process of building one of these is easy to follow, you just need to have the right tools handy.
DIY Surfboard Rack Free Downloadable Plans
It’s always a good idea to have a surfboard rack. It keeps the boards safe and saves space. You don’t have to store them separately, in the garage or in the backyard. If you have several surfboards, having a surfboard rack is definitely an option to consider. Before thinking about making one of these, you need to be sure that there’s enough space to accommodate the surfboard rack. As you can see, the rack is big enough to contain up to four large surfboards. The plans can be downloaded for free. The making process is easy, you should be done in no time.
How To Build A Low-Budget Surfboard Rack
Do you own a surfboard and need somewhere to store it? Because you can’t just leave it on the floor or any other place in your home. The board needs a rack that fits its size. If you belong to the category of people who are looking for a cheap surfboard rack, here’s one you can build without having to spend a lot of money. This rack is made of wood, the building process requires some basic woodworking tools. You should be done building it in a jiffy. Also, the rack can contain up to four surfing boards.
Materials:
- (4x) 2×4 x 10’
- (1x) 1” plywood
- (8x) 1.5” wood screws
- (20x) ¾” wood screws
- (20x) 2.5” wood screws
- Carpet/astro turf- 24”
- (5x) 12” round rods
- Permanent Marker
PVC Pipe Surfboard Rack
If you are an avid surfer, you probably have a whole lot of surfboards. This is especially true if you have been surfing for many years. With each passing year, you will likely get a few new boards as well. The question is how to store these boards without taking up a lot of space in your home. The answer is to make a surfboard rack using PVC pipes. You can find the instructions for this surfboard rack in this guide. You’ll need some PVC pipes, PVC connectors, screws, and glue.
How To Make A PVC Pipe Surfboard Wall Mounted Rack
PVC Pipes are a very versatile and cheap material. They can be used as a base for many projects. In this case, the creator uses them to make a surfboard rack that can be mounted on the wall. The creator uses PVC pipes to make the rack. The creator of this project has made the entire process easy to understand. He gives us an overview of what we will be needing in terms of materials and tools. He also makes sure to give detailed descriptions of every piece he is making so that you know what is going on at all times. Making a surfboard rack at home is not very complicated, but it might be difficult if you are doing it for the first time. The creator has made this easy for us by creating a detailed guide that anyone can follow without any trouble at all.
$20 Surfboard Rack for Scooter
Scooters are a great way to get around. They’re cheap, easy to park, and much more fun to ride than a car. But if you’re planning on taking your scooter to the beach or the lake for some surfing or wakeboarding, you’ll need a way to carry your board. In this DIY guide, we’ll show you how to build a $20 surfboard rack for a scooter. It only takes about 30 minutes, and it can be done with just a few simple tools. It’s also pretty easy to install and remove when you don’t need it anymore.
Materials:
- 2 x Metal rods 1.20m
- 2 x Galvanised square U Bolts 26mm
- 3 x Insulation pipes